Tektronix WFM 601i, User Manual

Page: 24 / 135

Installation
1–6
WFM 601i Serial Component Monitor
Packaged Accessories
The following accessory items are included with these monitors:
H
User Manual with Service Manual request card.
H
Power Cord
H
Replacement Fuse Cartridge (Qty. 1)
H
Replacement Graticule Light Bulbs (Qty. 4)
H
Replacement Air Filters for Fan (Qty. 4)
H
75 End-line Terminations, 26 dB to 300 MHz (Qty. 2)
Internal Jumper
Jumper J6 changes the rear panel Serial Out signal amplitude. Normal Output
amplitude is 800 mV, but some equipment may work best at 740 mV. Jumper J6,
located on the Deserializer board, can be changed so that the Serial Output is
740 mV. Table 1–1 gives the jumper settings.
Looking at the front of the WFM 601i, the Deserializer board is located on the
left hand side, near the rear instrument.
Table 1–1: Serial Output Jumper Settings
(J6 Deserializer board)
Pins Monitor Output
1 to 2 800 mV (default setting)
2 to 3 740 mV