Tektronix WFM 601i, User Manual

Page: 113 / 135

Appendix A: Specifications
WFM 601i Serial Component Monitor
A–7
Table A–13: Power Source
Characteristic Performance Requirement Reference Information
Electrical Rating 90 – 250 V, 50/60 Hz, 1.5 A maximum Continuous range from 90 to 250 Vac
Supply Type Single Phase
Supply Connection Detachable cord set
Power Consumption < 110 VA (75 watts)
Table A–14: CRT Display
Characteristic Performance Requirement Reference Information
CRT Viewing Area 80 X 100 mm
Horizontal: 12.5 divisions
Vertical: 1.19 V
Accelerating Potential Nominally 13.75 kV
Trace Rotation Range >
$
1
°
from horizontal Total adjustment range is typically
w
8
°
.
Graticule Internal with variable illumination.
Table A–15: Environmental Characteristics
Characteristic Performance Requirement Reference Information
Operating Temperature 0
°
to 40
°
C (+32
°
to 122
°
F)
Storage Temperature –40
°
to 75
°
C (–40
°
to 158
°
F)
Operating Altitude To 15,000 feet (4572 meters) IEC 1010–1 compliant to 2000 meters.
Storage Altitude To 50,000 feet (15,240 meters)
Vibration 5 minutes at 5 – 15 Hz with 0.060 inch displacement
5 minutes at 15 – 25 Hz with 0.040 inch displacement
5 minutes at 25 – 55 Hz with 0.020 inch displacement
Military Specification: Mil–T–28800D, Paragraph 1.2.2,
Class 3
Mechanical Shock Non Operating: 50 g’s 1/2 sine, 11 ms duration 3
shocks per surface (18 total)
Transportation Qualified under NSTA Test Procedure 1A, Category II
(24 inch drop)
Equipment Type Measurement
Equipment Class IEC 1010–1, Annex H, Class III