Tektronix WFM 601i, User Manual

Page: 25 / 135

Installation
WFM 601i Serial Component Monitor
1–7
Mechanical Installation
Rear
6.130
Bottom Side
12.725
8.250
6.875
0.688
1.060
16.180
5.105
0.156 Diameter
(4)
Figure 1-1: Dimensions of the 1700F00 plain cabinet.
The cabinets available for this instrument not only provide necessary shielding,
and protection against accidental electrical shock, but also provide internal
circuitry with protection against build up of dust. A supply of filtered, cooling
air is provided from the rear panel and exits through the cabinet vent holes.
Operation in air flow restricted environments may lead to excessive heat build
up.
All qualification testing for the WFM 601i was performed in a 1700F00 cabinet.
To guarantee compliance with specifications, the instrument should be operated
in a cabinet. The plain cabinet, 1700F00, is shown in Figure 1-1.
NOTE
. To meet EMI emission specifications, the WFM 601i must be installed in a
Tektronix 1700F00, 1700F02, or 1700F05 enclosure. The enclosure front edges
must securely contact the instrument’s conductive front bezel on all four sides.
The optional 1700F00 cabinet is the basic element for all of the cabinets that fit
this instrument. The 1700F02 Portable carrying case is an enhanced version of
Cabinets