Tektronix WFM 601i, User Manual

Page: 30 / 135

Installation
1–12
WFM 601i Serial Component Monitor
To mount the WFM 601i safely, attach it to a shelf strong enough to hold its
weight. Install the mounting screws through the four 0.156-inch diameter holes
in the bottom of the 1700F00 cabinet. See Figure 1-7.
Requires four 0.156” holes below
the 1700F00 cabinet to secure the
instrument to the shelf.
For Flush Front Panel: Cut hole
the same size as the monitor front
molding to allow the monitor front
panel to align with the custom
panel surface.
For Protruding Front Molding: Cut
hole in panel the same size as the
opening in the monitor cabinet to al-
low the front panel molding to cover
the hole.
Figure 1-7: Custom installation considerations.