Tektronix WFM 601i, User Manual

Page: 111 / 135

Appendix A: Specifications
WFM 601i Serial Component Monitor
A–5
Table A–7: Waveform Horizontal Deflection
Characteristic Performance Requirement Reference Information
Sweep Internal Sychronization: Proper horizontal and vertical
synchronization with a component digital signal
conforming to CCIR Rec. 601/656 and SMPTE 125M.
External Synchronization: Proper horizontal and
vertical synchronization with a composite sync signal of
approximate line and field rate.
Sweep Length:
[
12 divisions
Sweep freeruns without input
Sweep Timing Accuracy 1 Line: 5
m
s/division
$
1%
2 Line: 10
m
s/division
$
1%
1 Field displays one full field, including field rate sync.
2 Field displays two full fields and the field rate sync
between them.
Sweep Linearity
$
1%
Magnified Sweep Accuracy 1 Line: 0.2
m
s/division
$
1%
2 Line: 1.0
m
s/division
$
1%
Magnified Sweep Linearity
$
1%
Timing Cursors Accuracy:
$
0.5% at 25
°
C.
$
1% over operating
temperature range
Horizontal Position Range Any portion of the synchronized sweep can be
positioned on screen in all sweep modes
Table A–8: Calibrator
Characteristic Performance Requirement Reference Information
Waveform Square Wave Amplitude: 0.700 V
$
1%
Frequency: 100 kHz
$
0.1% Crystal-controlled 10
m
s square wave
Table A–9: Component Vector Mode
Characteristic Performance Requirement Reference Information
Vertical Bandwidth
w
1.0 MHz
Horizontal to Vertical
Bandwidth Matching
v
2
°
at 500 kHz and 2 MHz
Vertical Gain Accuracy
$
1 %
Horizontal Gain Accuracy
$
1 %
Display to
Graticule Registration
v
0.25 box with the color bar black display dot
centered in target.