Tektronix WFM 601i, User Manual

Page: 23 / 135

WFM 601i Serial Component Monitor
1–5
Installation
Packaging
At installation time, save the shipping carton and packing materials (including
anti-static bag) in case it becomes necessary to ship the instrument to a Tektronix
Service Center for service or repair.
If it becomes necessary to ship the instrument to a Tektronix Service Center for
service or repair, follow these instructions for repackaging:
1. Attach a tag to the instrument showing: the owner, complete address and
phone number of someone at your firm who can be contacted, the instrument
serial number and a description of the required service.
2. Repackage the instrument in the original packaging materials. If the original
packaging materials are not available, follow these directions:
a. Obtain a carton of corrugated cardboard having inside dimensions six or
more inches greater than the dimensions of the instrument. Use a
shipping carton that has a test strength of at least 275 pounds.
b. Surround the instrument with a protective bag (anti-static preferred). For
instruments which are not in a cabinet, wrap a cardboard piece around
the bagged instrument to protect components.
c. Pack dunnage or urethane foam between the instrument and the carton. If
using Styrofoam kernels, overfill the box and compress by closing the
lid. There should be three inches of tightly packed cushioning on all
sides of the instrument.
3. Seal the carton with shipping tape, industrial stapler, or both.
Repackaging for Shipment