DynaJet® IC7140
www.teejet.com
42
1
2
3
4
5
6
7
8
9
A
Adjusting Target Droplet Size
Droplet Size Increase – Press to increase the
target droplet size (decreases the target
pressure on the pressure gauge)
Droplet Size Decrease – Press to decrease the
target droplet size (increases the target
pressure on the pressure gauge)
Droplet Size Reset – Press to clear the
increase/decrease to the target droplet size
Figure 6-9:
Pressure Gauge – Pressure Indicators
BOOM APPLICATION ACTIVITY
Boom application activity is indicated below the static boom graphic.
◄
Nozzle Status On – Blue
◄
Nozzle Status Off – Gray
Figure 6-10:
Boom Application Activity – Less than 43 Nozzles
More than 43 Nozzles
When more than 43 nozzles are programmed, application status will
no longer include spacing between individual nozzles.
Figure 6-11:
Boom Application Activity - More than 43 Nozzles
Turn Compensation Enabled
When turn compensation is on, the turn compensation graph replaces
the static boom graphic.
See the Turn Compensation section of this chapter for more details.
Figure 6-12:
Turn Compensation Enabled
Current Pressure
Target Droplet Size
Summary of Contents for DYNAJET IC7 140
Page 1: ...DYNAJET IC7140 INSTALLATION SETUP USER MANUAL 98 05347 R1...
Page 73: ......
