TeeJet Technologies DYNAJET IC7 140, User Manual

Page: 26 / 74

DynaJet® IC7140
98-05347-EN-R1_A4LT-DynaJetIC7140-UM.docx
1
2
3
4
5
6
7
8
9
A
25
CHAPTER 4 - HOME SCREEN
The Home screen gives access to the DynaJet IC7140’s available functions.
NOTE: Information on the ECU will vary depending on the parameters set by the user and the OEM.
Figure 4-1: Home Screen
Home Screen Options
►
Quick Overview Box – Displays a quick overview of the state of the systems components. When a rate controller is on the system and
communicating, displaying some information is not required.
►
Available ECUs – Use to navigate between systems currently available on your UT. The highlighted ECU icon indicates the ISOBUS system
component that is in focus.
NOTE: Icons vary depending on systems available components.
DynaJet IC7140 ECU – Press to access the DynaJet IC7140 system.
A progress bar may be shown on the icon during start up while the system loads and communicates with all components.
While DynaJet is in Disengage Mode, ECU icon will change to alert user that the system is in Disengage Mode.
Use these softkeys to assist in operation:
Operation Mode – Press to access the Operation screen of the DynaJet IC7140 system
Operation Mode Not Available – Shown when the Operation screen is not available due to an error
Main Setup Menu – Press to access the main setup menu to input various control settings
Nozzle Favourites – Press to access the Nozzle Favourites screen to preset up to five (5) nozzles and select the current nozzle
A
vai
labl
e E
C
U
s
DynaJet IC7140 ECU
S
of
tk
ey
s
Quick Overview Box