SOFTWARE UPDATE
98-01571-EN-R1_A4LT-DynaJetIC7140-USBSoftwareUpdate-TB.docx
1
DynaJet® IC7140
As TeeJet Technologies continues to enhance its software, updates for the console will be made available at
www.teejet.com
. You must have the
software update folder stored on a USB storage device prior to beginning the update.
RECOMMENDATION: Be parked while the update is in progress. This will help ensure that the update process is not interrupted by the USB drive
bouncing around while the vehicle is in motion.
NOTES:
►
The file is in a compressed zip format and needs to be unzipped/ uncompressed before loading onto the USB drive.
►
The software update file can be used on multiple consoles.
WARNING! Do not use a USB storage device with U3 technology (also known as “U3 smart drives”) as U3 technology could cause downloading
issues.
Settings May Not Be Retained
Updating from early releases (before sv1.11) of the DynaJet IC7140 may not retain all programmed settings or configurations. It is always
recommended to notate the current configurations using the 98-01557 User Settings Log available at
www.teejet.com
.
Check the USB Drive
The programming port on the module has limited access space. This
can lead to some USB drives to not fit into the USB port.
1.
While the DynaJet IC7140 is off, unscrew the Programming Port
cover
(A)
using a large flat head screwdriver.
CAUTION: Removal of the Programming Port cover exposes
internal parts of the ECU. The cover should be off only
when using the USB port. Be cautious to keep the port
clean and dry.
2.
Insert the intended USB drive into the DynaJet IC7140 ECU USB
port
(B)
, verifying that it fully seats within the port.
WARNING: Do not start the system while USB is inserted.
3.
Remove USB drive.
4.
Replace the Programming Port cover when finished. Tighten
securely to avoid water leaks.
If the USB drive fits, proceed to the Software Installation.
If the USB drive does not fit, try a different USB drive, or use a USB
extension cable.
Figure 1:
Programming Port Location
Summary of Contents for DYNAJET IC7 140
Page 1: ...DYNAJET IC7140 INSTALLATION SETUP USER MANUAL 98 05347 R1...
Page 73: ......
