DynaJet® IC7140
www.teejet.com
26
1
2
3
4
5
6
7
8
9
A
System Overview – Press to access the System Overview screen to locate any problems as well as give information on selected drivers
or solenoids
Disengage Mode – Press to activate Disengage Mode.
Disengage Mode Not Available – Shown when Disengage Mode is not available due to an active application state such as
Master Switch On or one or more sections on.
Accessing the Home Screen
The Home screen can be accessed using the Home key from any
screen.
1.
From any screen, press the HOME KEY.
Figure 4-2:
Home Screen – from Main Setup Screen
Figure 4-3:
Home Screen – from Operation Screen
Figure 4-4:
Home Screen – from System Overview Screen
Quick Overview Box
The Quick Overview section on the Home screen displays several
values to alert the user of the state of the system. Information
displayed in the quick overview will vary depending on rate controller
communication availability.
Use the SYSTEM OVERVIEW KEY to get more details on the system
components. See the “SYSTEM OVERVIEW” chapter for more
details.
Rate Controller Communications
The following set of information will inform the user of the current
implement status and signify any issues by displaying an alert.
•
Nozzles – number of nozzles
•
Sections – number of sections
•
Drivers– number of drivers
•
Boom Module – number of boom modules
•
Start Terminator – number of start terminators
•
End Terminator – number of end terminators
Figure 4-5:
Quick Overview without Rate Controller
Rate Controller Communications
The following set of information is what is available with a rate
controller to inform the user of the current implement status and
signify any issues by displaying an alert.
•
Nozzles – number of nozzles
•
Drivers– number of drivers
•
Start Terminator – number of start terminators
•
End Terminator – number of end terminators
Figure 4-6:
Quick Overview with Rate Controller
Summary of Contents for DYNAJET IC7 140
Page 1: ...DYNAJET IC7140 INSTALLATION SETUP USER MANUAL 98 05347 R1...
Page 73: ......
