DynaJet® IC7140
www.teejet.com
10
1
2
3
4
5
6
7
8
9
A
Pressure Sensor
Without a Pressure Interface
(4)
Pressure Sensor Cable [45-05887 or 45-05886] connects the
(2)
DynaJet ECU Harness to the
(3)
Pressure Sensor [16-05015]. Extension cables
404-0045 or 404-0039 are also available to connect the pressure sensor to the DynaJet Hybrid ECU Harness.
Use
(2-2)
18 Position Cinch Dust Cap to cover the open port on the
(1)
DynaJet IC7140 ECU Module
With a Pressure Interface
(5)
Pressure Interface [78-05137] connects to the
(1)
DynaJet IC7140 ECU Module.
(4)
Pressure Sensor Cable [45-05887 or 45-05886] connects the
(5)
Pressure Interface [78-05137] to the
(3)
Pressure Sensor [16-05015]. Extension cables [404-0045 or 404-0039] are also available to connect the
pressure sensor to the Pressure Interface.
Boom Interface Module (BIM)
(6)
Boom Interface Module (BIM) Hybrid harness [45-10195] connects between the
(2)
DynaJet ECU Harness and a
(7)
CAN cable [45-04006-xx].
The
(10)
Boom Interface Module (BIM) [78-05091 or 78-05128] connects to the
(6)
Boom Interface Module (BIM) Hybrid harness [45-10195].
Figure 1-5:
Installation
Summary of Contents for DYNAJET IC7 140
Page 1: ...DYNAJET IC7140 INSTALLATION SETUP USER MANUAL 98 05347 R1...
Page 73: ......
