TeeJet Technologies DYNAJET IC7 140, User Manual

Page: 14 / 74

DynaJet® IC7140
98-05347-EN-R1_A4LT-DynaJetIC7140-UM.docx
13
1
2
3
4
5
6
7
8
9
A
CHAPTER 2 - SCREEN INTRODUCTION
Congratulations on the purchase of your new DynaJet IC7140 ECU built on the ISOBUS architecture. When used within the guidelines of this manual,
the DynaJet IC7140 will be a reliable droplet size control system.
BASIC SCREEN USE
The DynaJet IC7140 display comprises Available ECU buttons, an interactive information display and softkeys.
•
A firm touch is required when selecting a screen icon.
•
Setup options are NOT automatically saved when selected.
The ACCEPT KEY must be selected to save the setting.
Select the ESCAPE KEY to escape without saving settings and return to the previous menu.
NOTE: The softkey menus and touch screen structure on your display might vary from the one displayed in this user manual depending on the universal
terminal being used.
Figure 2-1: Screen Overview
General Screen Options
►
Available ECUs – Systems currently available on your UT are displayed
in the left hand column of every screen. The highlighted ECU icon
indicates the ISOBUS system component that is in focus. To navigate
between systems, press the desired system’s icon.
NOTE: Icons vary depending on systems available components.
DynaJet IC7140 ECU – Press to access the DynaJet IC7140
system.
A progress bar may be shown on the icon during start up while the system loads and communicates with all components.
A
vai
labl
e E
C
U
s
DynaJet IC7140 ECU
Softkeys Interaction Information Display
Operation
Main Setup Menu
Nozzle Favourites
System Overview
Disengage Mode
Operation