5. Removing and Replacing the Instrument Cover
2004-10
Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1
5-3
5.2 Removal of the Front Cover
The front panel is removed using the following procedure:
1. Switch the instrument OFF
2. Remove the main power cable from the socket
3. Remove the lamp compartment cover by gently pulling it from the underside.
4. Remove the four screws in the right hand side cover area.
5. Open the plate opening lid and remove the screw in the top left hand corner.
6. Open the filter compartment lid and remove the screw on the bottom left hand
side.
To replace the front cover, follow the instructions in reverse order.
Ensure that the catch and cover do not become damaged.
Plate Support Lid
Cartridge / Filter Compartment Lid
Lamp
Compartment
Lid
POWER
front panel screws
