4. Firmware and Software Description
4-10
Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1
2004-10
4.4.4 Device
configuration
The following dialog box is displayed.
Correct or accept the default values and click
OK
.
4.4.5
Mirror and lamp adjustment
Select
Lamp adjust…
from the <Setup> menu. The following dialog box is
displayed:
Select the first filter and click
Start
. The dialog box shows the minimum and
maximum values in percent (%). Adjust the three screws until the minimum and
the maximum percentage values lie in the lowest range possible.
Click
Poti adjust
to adjust the amplification. The software adjusts the potis
automatically and checks that the minimum and maximum percent values are
between a minimum 58 and maximum 89 percent(%).
The following picture shows the three screws for adjusting the mirror:
