13. Trouble Shooting
2004-10
Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1
13-1
13. Trouble Shooting
13.1 Introduction
Error number
Error text
Possible Defective Part
See chapter…
0x0203
"Not expected
transport FixedOut
IRQ"
Optical switch within transport box is
broken, plate calibration values got
lost
4.4.6 Plate calibration
0x0204
"Not expected
transport Rear
IRQ"
Optical switch within transport box is
broken, plate calibration values got
lost
4.4.6 Plate calibration
0x0205
"Transport lost %s
steps"
Optical switch within transport box is
broken, plate calibration values got
lost
4.4.6 Plate calibration
Duration Test page 4-16
0x0206
"Transport
inserted %s steps"
Optical switch within transport box is
broken, plate calibration values got
lost
4.4.6 Plate calibration
Duration Test page 4-16
0x0207
"Transport can't
find HOME
position"
Optical switch within transport box is
broken, plate calibration values got
lost
4.4.6 Plate calibration
0x0208
"Transport can't
find REAR
position"
Optical switch within transport box is
broken, plate calibration values got
lost
4.4.6 Plate calibration
0x0209
"Lamp high"
too much light to perform a reliable
measurement
4.4.5 Mirror and lamp
adjustment
0x020A
"Lamp low"
too less light to perform a reliable
measurement
4.4.5 Mirror and lamp
adjustment
0x020B
"Timeout waiting
for lamp on"
check power board and lamp
4.4.5 Mirror and lamp
adjustment
0x020C
"Timeout waiting
for measurement
finished"
Problem with the transport system
see transport box, optical switches
broken
7.5 Replacing the
Transport Box
0x020D
"Timeout waiting
for transport
finished"
Problem with the transport system
see transport box, optical switches
broken
7.5 Replacing the
Transport Box
0x020E
"Not expected
transport IRQ %d
during calibration"
Problem with the transport system
see transport box
7.5 Replacing the
Transport Box
0x020F
"Transport couldn't
find full dark edge
during calibration"
Problem with the transport system
see transport box
7.5 Replacing the
Transport Box
0x0210
"Transport lost %d
steps during
calibration "
Problem with the rear sensor of the
transport box
7.5 Replacing the
Transport Box
0x0211
"Transport
frequency too low:
%d < %d"
check settings of Measurement
Mode
4.3.5 Define Measurement
Mode
0x0212
"Transport
frequency too
high: %d > %d"
check settings of Measurement
Mode
4.3.5 Define Measurement
Mode
0x0301
"Writing to flash
failed"
Problem with the main board
8.5Replacing the Main
Board
0x0302
"Verifying flash
failed"
Problem with the main board
8.5Replacing the Main
Board
