4. Firmware and Software Description
2004-10
Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1
4-13
4.4.8 User
Configuration
Select
User configuration…
from the
Setup
menu. The following dialog box is
displayed:
In this dialog box the
Options
,
RC mode
and
Filters
can be defined. In the
Options
area activate the installed options by selecting the appropriate checkbox
(Barcode, Temperature control, Touchscreen).
Caution
If an option is activated that is not available, the instrument will not
function properly!
When using the
Tuneable Wavelength
option, you must enter filter table values in
the
Gradient filter
text boxes for each wavelength and you must also enter the
Filter slide ID
number of the gradient filter slide. If more standard filters are used,
define the filters under
Filter definitions
. After all of the information has been
correctly entered, click
OK.
The filter slide moves out and by default the following dialog box is displayed:
The software will prompt the user to enter each slide that has been defined in the
User configuration
dialog box. Each time the prompt appears enter the
appropriate filter slide and click
OK
; each slide will move in automatically and
each of the defined filters will be checked.
