11. Maintenance & Cleaning
11-6
Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1
2004-10
11.4 Fuse Replacement
The following steps must be performed to replace the fuse, which is located
above the power cable connection, in the rear panel of the instrument.
WARNING
TO PREVENT THE RISK OF FIRE, THE MAIN FUSES SHOULD ONLY BE
REPLACED WITH THE SAME TYPE AND RATING OF FUSES.
1. Switch off the instrument and unplug the power cord.
2. Open the plastic cover of the fuse compartment by inserting a screw driver
into the slot in the top of the cover and pushing the cover out.
3. The fuse holders are located above the on/off switch.
4. Pull the fuse holder(s) out and replace the defective fuse(s) with the spare
fuse(s).
Ensure that the fuse(s) has/have the correct rating.
F 2.0 A / 250 V (Fast Blow)
5. Replace the fuse holder(s), ensure that the arrow points in the correct
direction and close plastic cover of the fuse compartment.
6. Reconnect the power cord and switch the instrument on
WARNING
IF THE FUSE CONTINUES TO BLOW, PLEASE CALL FOR SERVICE.
Fuse holders
