Tascam HS-4000 Owner'S Manual Download Page 123

Page: 123 / 152

TASCAM HS-4000

123

13 – Other functions

Switching the online playback mode

When the online function can be changed (ONLINE Function

item is set to Switchable), the following operations can be used

to turn the online playback mode on/off.

• Main unit: press the ON LINE key

• When parallel control connected: ONLINE event

• When RS-232C serial control connected: ONLINE command

• TASCAM RC-HS32PD remote controller (sold separately):

press the ONLINE key

In dual or A/B MIXED mode, only the online playback mode

for the selected player can be turned ON/OFF on screen. When

using a TASCAM RC-HS32PD remote controller (sold separately),

however, regardless of which player is selected, you can press

the player A or B ONLINE key to turn online playback mode ON/

OFF for the corresponding player.
When online playback mode is turned ON/OFF, the following

occurs depending on the mode.

When in timeline, take, single playlist or on-air mode

• When online playback mode is turned ON, the

icon appears at the top left of the screen

and the ON LINE key lights red.

• When online playback mode is turned OFF, the

icon disappears from the top left of the

screen and the ON LINE key becomes unlit.

When in dual playlist or A/B MIXED mode

• When online playback mode is turned ON, the

icon changes to the

icon at the top left of the

time counter for the selected player, the time counter

background turns red and the ON LINE key lights.

• When online playback mode is turned OFF, the

icon changes to the

icon at the top left of the

time counter for the selected player, the time counter

background turns black and the ON LINE key becomes unlit.

Outputs during online playback

The relationship between online playback mode and sound

outputs are as follows.

Online playback mode

OFF

Analog line outputs (1−4)

Digital line outputs (1−2, AES/EBU)

Analog monitoring output (L, R)

Headphones

RC-HS32PD (headphones, speakers)

*The monitoring signal is always output.

CAUTION

When the ONLINE Function item is set to AlwaysON, sound is

always output from all connectors.

TIP

By turning the Monitor Mute by Online item (MIXER SETUP

screen SETUP page) ON, you can enable monitoring output

to automatically be turned off when online playback mode

is on.
For details about the Monitor Mute by Online item, see

“SETUP page (MIXER SETUP screen)” on page 110.

Flash start function

Use the flash start function to instantly start playback of takes

that you have designated in advance.
A maximum of 96 takes (2x96 takes in dual player mode) can be

started instantly using a keyboard or devices connected to this

the unit’s remote connectors (REMOTE and PARALLEL).

Setting the flash key function

1. Press the MENU key on the front panel to open the MENU

screen.

Summary of Contents for HS-4000

























































































































































Search results

Summary of Contents for HS-4000

Reviews:

Related manuals for HS-4000

Brands by name

Popular brands

Tascam HS-4000, Owner'S Manual

Search results

Summary of Contents for HS-4000

Reviews:

Related manuals for HS-4000

Brands by name

Popular brands