manualshive.com logo in svg

Tascam HS-4000, Owner'S Manual

Share
Download
Tascam HS-4000 Owner'S Manual Download Page 33

TASCAM HS-4000

 33

4 – Basic operation

Setting the master clock

1.  Press the HOME key on the front panel to open the Home 

Screen.

 

2.  Touch the SYNC button to open the SYNC T/C screen.

NOTE

You can also open the SYNC T/C screen by touching the 

SYNC T/C button on the MENU screen. 

3.  Select the master clock that you want to use from the 

MASTER item. (See “Sync and timecode settings (SYNC T/C)” 

on page 104.)

Setting inputs and outputs

Setting the inputs

1.  Press the MENU key on the front panel to open the MENU 

screen.

 

2.  Touch the MIXER SETUP button to open the MIXER SETUP 

screen.

 

On the INPUT page, make settings for each channel’s input 

source. For details, see “INPUT page” on page 109.

3.  If necessary, touch the MONITOR MIXER or SETUP tab to 

open the corresponding page where various settings can be 

made.
On the MONITOR MIXER page, make settings related to the 

internal monitoring mixer. For details, see “MONITOR MIXER 

page” on page 110.

Summary of Contents for HS-4000

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands