Tascam HS-4000 Owner'S Manual Download Page 141

Page: 141 / 152

TASCAM HS-4000

141

17 – Messages

Message

Details and responses

Remarks

Loading Take …

The selected take is loading.

Make new Session?

"ssssssss"

TIMELINE Start Time: **h**m**s**f

TIMELINE Rec Tracks: N tr

Confirm that you want you want to make a new

session.

"ssssssss" = session name
N = number of tracks

Make Playlist failed

Creation of playlist failed.

Make session failed

Creation of session failed.

Making Playlist …

A playlist is being created.

Making session …

A session is being created.

Mark Point set

A mark has been created.

Network Control Locked

Network control is locked to prevent misoperation.

New Session Name must not start with

"@"

The session name is not allowed. You cannot use the

"@" symbol at the beginning of a session name.

No Call Point

The call point does not exist. (The session or take has

not been played back since it was loaded.)

No Mark Point

No marks exist. You tried to skip marks before any

marks were added.

This disappears automatically after 2

seconds.

No Tracks Armed for Record

No tracks have been armed for recording.

Now working ...

Do not remove Media.

The media is in use, so do not remove it.

--- ONLINE Function ---

Changes Output Routing.

Touch OK to make ONLINE ********.

Enabling and disabling the ONLINE function changes

the audio output routing.

******** = always ON/switchable

ONLINE is not available

in Adjust Screen.

The ONLINE key does not function on the ADJUST

ENTRY screen.

Operation failed.

The operation could not be completed for some

reason.

Operation failed.

Internal File / Session

limit reached.

The maximum number of sessions that can be created

has been reached, so the operation could not be

completed.

Operation failed.

Cannot find this ***.

Please Rebuild.

The selected project/session/take could not be found,

so the operation could not be completed.
Rebuild the selected item.

*** = name of project, session or take

Operation failed.

Path Name is too long.

The path name has more characters than allowed, so

the operation could not be completed.

After you give a project or session

a long name using a computer, this

message could appears when making

a session or recording results in a

file path name of more than 255

characters.

Operation Failed.

Unmatched Fs.

The sampling frequency does not match.

Password mismatch.

Password not changed

The passwords entered the first and second times

were different, so the password was not changed.

Play Error.

An error occurred during playback.

Play Error

Buffer underrun

Data reading could not keep up during playback.

PlayError.

nnn:NNNNNNNN

A playback error occurred with the take of the number

and name shown.

nnn: take number
NNNNNNNN: take name

Playlist Import completed

but there are some wrong entries.

Playlist importing has completed, but some entries

have problems.

Playlist Load completed

but there are some wrong entries

in Playlist*

Playlist loading has completed, but some entries have

problems.

Playlist* = "Playlist", "Playlist A",

"Playlist B" or "Playlist A/B"

"PPPPPPPP"

Size: **MB"

yyyy / mm / dd hh: mm

This shows playlist information (A/B).

"PPPPPPPP" = playlist name

Summary of Contents for HS-4000

























































































































































Search results

Summary of Contents for HS-4000

Reviews:

Related manuals for HS-4000

Brands by name

Popular brands

Tascam HS-4000, Owner'S Manual

Search results

Summary of Contents for HS-4000

Reviews:

Related manuals for HS-4000

Brands by name

Popular brands