68
[Delete Repeater] Button
This deletes the Repeater selected from the Registration List.
* When using more than one Repeater, only the last one in the Route can be deleted. If you
wish to delete Repeater(s) other than the one last one in the Route, it is necessary to either
delete each Repeater in sequence from the last to the one(s) you wish to delete, or delete the
entire Relay Route itself (as above in "Delete Route") and register Repeaters to design a Route
again.
[Replace Unit] Button
If you wish to replace a Repeater with a new one due to malfunction or trouble without changing
the Route design, connect the new Repeater to the computer via a USB or Serial Cable and
click this button. The prior Repeater Info will be registered into the new Repeater.
*All Remote Units that were assigned to the Repeater that was changed will be returned to
be directly under the Base Unit. If necessary, please reassign those Remote Units to the new
Repeater.
[Initialize] Button
Connect the Repeater you wish to initialize to your computer with a USB or Serial
Communication Cable, and click the [Initialize] Button.
NOTE:
By initializing all info saved in the Repeater will be erased and will be returned to as it was when it left the
factory (as a Base Unit used for another T&D product).
[Get Repeater Info] Tab
[Get Unit Info] Button
[Get Repeater Info] tab
Connect the Repeater from which you wish to get info with a USB or Serial Communication
Cable, and click the [Get Unit Info] Button.
- Results: Displays whether the connected unit has been Initialized or registered as a "Repeater"
*The Initialized setting is as a Base Unit for another T&D product.
*In the RTR-5W system this can only be used as a Repeater.
- Relay Route Name: the Relay Route Name will appear.
- Communication Frequency Channel: the Communication Channel for the Relay Route to which
the Repeater belongs will appear.
- Repeater Number: the number of the Repeater will appear.
- Battery Level: the remaining amount of battery power will appear for the Repeater. (0: No Battery
– 5: Full)
