116
Notifi cation Settings
-Amount of send rest time after sending warning report mail
Warning report mail will continue to be sent until the warning settings have been changed or
the measured value falls back within the acceptable range, but it is possible to make settings
here for a rest period to occur after a warning mail has been sent, so that they will not
continually be sent. By entering 0, there will be no rest period.
-Notify of a communication failure for monitoring warnings
Place a check here if you wish to have communication failure reports sent to the recipient
address(es).
-Switch external output to ON when a warning occurs
Place a check here if you wish to have an alarm or warning lamp that is connected to the
external output go on when a warning occurs.
9.
Click the [Set] Button to send the settings info to the RTR-5W and complete the
settings.
[Setting]
Button
[Notifi cation Test]
Button
