118
Battery Life Warning Settings
Make settings here to send a notifi cation of low battery power via e-mail from the RTR-5W.
1.
Open RTR-5W for Windows.
2.
Click on [Remote Unit Battery Life Warning Settings] in the [Settings] Menu.
3.
Place a check next to [Send Warning E-mail from RTR-5W] and enter the Send
Time, Sender Address and Recipient Address. Also, if you wish to use the
same settings for all locations, put a check next to [Make same settings for all
locations].
Check
4.
Click the [OK] button to send the settings to the RTR-5W and complete the
settings.
5.
Click the [Transmission Test] button to test if a mail can be sent.
If warnings exist, send mail at this time:
Make setting for the time of sending a battery life warning mail.
Sender Address
Enter the address from which a battery life warning mail will be sent.
NOTE:
Please enter a valid e-mail address via which the sending and receiving of e-mail can be performed. It should
be noted that if you assign an invalid or an imaginary Sender Address, the mail may not reach the intended
party.
Recipient Adress
Enter the address to which a battery life warning mail will be sent. Up to 3 e-mail addresses
can be assigned. Please set an address to which it is possible to send a mail from the
RTR-5W environment.
