11
Initialization Settings
1. Network Initialization Settings
Ȥ
from the Network Settings Utility
To connect to a network, it is necessary to enter an IP address and Subnet Mask that are
appropriate for your network. Under Network Initialization Settings make the appropriate
settings for your [IP address] and [Subnet Mask]. More detailed settings can be made in [Detailed
Network Settings].
2. Remote Unit Registration
Ȥ
from RTR-5W for Windows
®
In order to carry out wireless communication between an RTR-5W base station and a Remote
Unit, please register Data Loggers as Remote Units as follows.
1. Create a Location
2. Create Group(s)
3. Register Remote Unit(s)
4. Depending on the communication status, register and position a Repeater
*Up to 64 Remote Units can be registered to one Location.
Basic Operations
1. Recording Settings
Ȥ
from RTR-5W for Windows
®
By setting the Recording Interval, the Recording Start Date / Time and the Recording Mode,
recording will begin at the set date and time.
*When using RTR-52Pt make sure to make any necessary sensor and adjustment settings.
2. Download Data
Ȥ
from RTR-5W for Windows
®
Data recorded in the Remote Unit will be downloaded and saved in your computer as a data
fi le. Downloaded temperature and humidity data can be viewed in [Temp / Humidity Graph],
downloaded Voltage, Pulse and Temp / Humidity data can be viewed in [Multi-scale Graph] and
downloaded Event data can be viewed using [Event Viewer].