36
4.
Enter an IP Address and Subnet Mask.
- Make sure to enter an IP Address and Subnet Mask that are appropriate for your
network.
NOTE:
Do not use the same IP address for two different units. It may cause abnormalities to the entire network
system.
Enter an IP address
and Subnet mask
[Send]
Button
Enter the Login ID and
Password
5.
After entering the above, next, enter the Login ID and Password.
The RTR-5W factory default Login ID is "wsc-user" and the Password is "wsc-passwd".
Make any necessary changes to the Login ID and Password in the [Detailed Network
Settings]. See p.36-37 for details.
6.
After checking for entry errors, click the [Send] Button. After transmission has
been completed a message will appear.
Click the [OK] Button to fi nish.
* After settings are completed the RTR-5W will automatically restart. During the
restarting process, a search cannot be performed, even if you click the [Search]
Button. Please try again after 30 seconds.
If no units are detected
- Check the connection between the computer and the RTR-5W.
- Check the hub power switch and the network cable type.
- If some network environments, it may be necessary to make changes to the IP address
and subnet mask at the computer side in order to carry out a search. For details, see
p.129-131 [Checking and Making Changes to Computer Network Settings]
- Do not use a LAN card which has not been formatted.