18
External Output
ɡ
Connecting the Signal Wire
1.
Prepare a
ϫ
0.5
ȡ
0.9 single type wire and remove the covering to about 10mm
from the tip.
2.
Using a screwdriver or other such tools, while pressing down on the <terminal
Button B> at the back of the unit, insert the wire into the <hole A>.
<A>
<B>
Enlarged view of Wire
Connection Terminal
ɟ
External Output: With Warning ON
Voltage when OFF: AC/DC less than 50V
Current when ON: less than 0.1A
Resistance when ON: 35
Ϯ
ɟ
Useable Wires
Compatible Wires: Single wire:
ϫ
1.0 (AWG18) / Twisted wire: 0.75mm
2
Useable Wires: Single wire
Ȥϫ
0.4
ȡϫ
1.0 (AWG26
ȡ
18)
Twisted
wire
Ȥ
0.3
ȡ
0.75mm
2
(AWG22
ȡ
20)
Cable core diameter
Ȥϫ
0.18
Standard Stripping Length: 0.39in
Compatible Connector Tool: Screwdriver (Shaft:
ϫ
0.3 / Blade Tip Width: 2.6)
ɡ
Removing an Input Signal Wire
If you wish to remove an input signal wire, press down on the <B> Button with a
screwdriver and pull out the wire.
NOTE:
Please be careful when pulling out the wire.