65
Com. Freq. Ch.
- Here it is possible to set the frequency channel for when registering the new Relay Route
name.
- The "Relay Route Frequency Channel" is the channel used for the communication among
Repeaters and is different from the term "Frequency Channel" which means the channel
used for the communication between the Base and Remote Units. So, no trouble occurs if
the number for the "Frequency Channel" set when registering a Remote Unit to a Group is
different from the number used for the "Relay Route Frequency Channel" when adding a
Repeater to a Relay Route.
- Once a setting has been made it cannot be changed.
Memo
It is helpful to make a memo entry here in order to distinguish between Repeaters. (Up to 8
characters can be entered.)
You may leave this fi eld blank if not necessary and should note that changes cannot be made
after registering a Repeater. If you wish to make changes, it is necessary to create the Relay
Route again.
