35
Network Initialization Settings
To connect an RTR-5W to a network, it is necessary to enter an IP Address and Subnet
Mask that are appropriate for your network.
NOTE:
Please note, that upon purchase, all RTR-5W units are set with the same IP address. To make IP address
changes, connect one unit at a time and carry out the changes. Do not connect more than one unit with the
same address to the network at the same time.
1.
Connect the RTR-5W to the same network as to which the computer you have
opened [Network Settings Utility] is connected to.
2.
Click on the [Network Initialization] Tab and then click on the [Search] Button.
After clicking, the search results will be shown in about 5 seconds.
*The factory default settings for RTR-5W are as follows: IP Address: "192.168.1.200",
Subnet Mask: "255.255.0.0". The MAC address is written on a sticker on the back of the
RTR-5W unit.
[Change Settings]
Button
[Search]
Button
Connected RTR-5W
3.
From the displayed list, select the RTR-5W to which you wish to make settings by
clicking on the IP address and click on the [Change Settings] Button.
- Also, by double clicking on the IP address, the [Network Settings] window appear.
