TANDBERG Voyager E5784, Reference Manual, Page: 300 / 384

Technical Specification
Page B-8 Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
ST.RE.E10137.3
Item Specification
Output (digital) ref AES/EBU digital
Impedance 75
Ω
Sampling rate 48 kHz
Coding Standards
Coding standard MPEG-1 Layer 2 (ISO/IEC 11172)
Supported coding modes Single Mono, Dual Mono, Joint Stereo, Stereo
Supported coded data rate 32 kbit/s - 384 kbit/s
Coding standard Dolby Digital (AC-3) (ATSC A/52, DVB TR 102 154)
Supported coding modes 1/0, 2/0
Supported coded data rate 56 k - 640 kbit/s
Coding standard Dolby Digital AC-3 Pass-through (ATSC A/52, DVB TR 102 154) (see
Note 1 , after Table)
Coding standard Linear PCM/Dolby E Pass-through (SMPTE 302M) (see Note 1 , after
Table)
Coding Standard DTS Pass-through (see Note 1 , after Table))
NOTES…
1. Refer to Annex F, Audio Modes when using these coding standards.
2. Problems may be experienced with some Receivers if the Encoder and Decoder are not using the
same version of SMPTE 302M specification, e.g. either 1998 or 2000. The Encoder can be set up
to work in either standard.
3. The digital audio input does not support SPDIF.
CAUTION…
When the unit is not powered the audio input defaults to digital with 110
Ω
termination.
Table B.10: MUSICAM Analogue Test Specification
Item Specification
Set-up of Alteia Receiver
Audio Format MPEG
Output Analogue
Clip Level 18 dB
Set-up of Audio Encoder
Input Analogue
Clip Level 18 dB
Sampling Frequency 48 kHz
Coding Standard MUSICAM, MPEG 1 (Layer 2)
Coding Mode Stereo
Bit-rate 384 k bit/s
Set-up of Lindos Audio Oscillator
Sequence TPBDLKZ
Test Tolerance for Left and Right Legs for Channel (A) and Channel (B)
Test Level T
1 kHz @ 0 dB ± 0.2 dB
Sweep 20 Hz - 20 kHz @ -20 dB P