Operating the Equipment Locally: ATM Network Interface Option Module
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
Page 4-131
ST.RE.E10137.3
Def UNI Version Option
This option is the default User to Network Interface (UNI) protocol version
used to communicate with the ATM network, defined by the connected ATM
network operator. This only needs to be specified if the ATM network does
not support ILMI, which normally automatically negotiates the version to
use. Use the softkeys to amend the Default UNI option.
Table 4.163: Def UNI Options
Selected Option
Description
UNI 3.0
UNI 3.1
UNI 4.0
Protocol versions used to communicate with
the ATM network, defined by the connected
ATM network operator.
Enable SVC PMP Option
This enables the Enable SVC PMP to be changed.
Table 4.164: Enable SVC PMP Options
Selected Option
Description
TRUE
When set to TRUE a new status parameter,
Own ATM Address, appears in the General
menu.
FALSE
Status-only Options
The following options are status only and cannot be changed.
•
Own ATM Address
22
•
Software Release
•
Protocol Version
•
Hardware Release
•
TxFirmware Release
•
RxFirmware Release
4.11.14 Tx Menu
TS Source Option
This option enables a choice of which MPEG transport stream source is to
be transmitted.
Table 4.165: TS Source Options
Selected Option
Description
Encoder Default
setting.
ASI
External ASI BNC input.
22
Own ATM Address only appears in the General menu when the Enable SVC PMP option is set to TRUE.