Web Browser Interface
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
Page 5-7
ST.RE.E10137.3
NV Event Log - shows the actions which have been performed
since the Encoder was last switched on
External Control – gives the IP addresses of external equipment
which can control the Encoder.
•
Utilities
Symbol Rate Calculator
The Modulation Help allows you to see the difference that various
parameters have upon the symbol rate and bandwidth.
OFDM Bit-rate Calculator
The Bit-rate Calculator allows you to enter various parameters and
the optimal bit-rate (Mbit/s) is automatically calculated for 204
bytes and 188 bytes.
Telnet
Allows you to connect to a Telnet session.
Video Monitor
The Video Monitor displays the video input to the Encoder.
Front Panel
For TANDBERG Television use only.
Encoder List
Shows a list of the Encoders on the network together with various
parameters.
OSD
-
Download Utilities – allows you to download an osd.zip file
which consists of an OSD Creator (Creator.exe) and OSD
Loader (OSD.exe). There is a logo overlay facility allowing
broadcasters to trademark material whereby the Encoder is
able to overlay broadcasters trademarks/logos onto the active
video. See Annex E, Creating and Downloading a Logo for
information on how to use the programs.
•
Configure
Shows all the menus relevant to the Encoder and allows it to be set up.
•
Errors
Current Errors - shows a list of Active Errors, Masked Active
Errors and Latched Errors.
Masks
-
All Modules – allows you to set the alarm error masks to
Masked, Alarm, Fail or Ignore.
-
Modules - allows you to set the alarm error masks for each
individual module to Masked, Alarm, Fail or Ignore.
