Operating the Equipment Locally: Output Menu - Output Format = Satellite Modulator (L-Band Output)
Page 4-112
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
ST.RE.E10137.3
Sat Orb Pos Option
Refer to Sat Orb Pos Option on Page 4-109 for details.
Sat West/East Option
Refer to Sat West/East Option on page 4-109 for details.
Polarisation Option
Refer to Polarisation Option on page 4-109 for details.
Status Only Options for the Satellite Modulator Menu
The following options are for status only and cannot be changed.
•
Baseband (BB) Card Option
•
BB PCB Revision Option
•
BB Mod Status Option
•
BB Serial No. Option
•
BB S/W Release Option
•
BB CPLD F/W Release Option
•
BB DSP F/W Release Option
•
BB RNF F/W Release Option
•
L-Band Output Card Type Option
•
DPC Card Type Option
BUC LO Frequency
This represents the overall translation frequency of the external
up-converter.
Transmit Frequency
Transmit Frequency refers to the frequency of the RF output from an
external up-converter that is used in the satellite earth station to
frequency up-convert the Modulator’s IF output. The parameters IF
Frequency and Uplink Freq are interrelated; when an Uplink Freq value is
entered, the value of IF Frequency is calculated and set automatically. The
allowable range of Uplink Freq is dependent upon the Modulator model, the
UpConv Freq and IF Spectrum settings.
BUC 10 MHz Ref O/P Option
This is used for switching On or Off the 10 MHz frequency reference which
may be used by an external BUC.
4.9.10 Output Format = IP Streamer
(M2/EOM2/IP/PROFEC Option Module)
Own IP Address Option
Access the Own IP Address option from the
IP Streamer Menu
. This is the
local IP address associated with the 100 Mbit/s Ethernet video output
interface.
