Operating the Equipment Locally — Setup Menu: Video Menu
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
Page 4-39
ST.RE.E10137.3
Table 4.25: OP Video Loss Options
Selected Option
Description
SD
HD
Freeze Frame
The last video frame received is encoded if the video input is lost.
3
2
Black
A black screen is encoded if the video input is lost.
3
3
Bars & Red
Bars and red test pattern is encoded if the video input is lost.
3
2
Ident
The last video frame received is encoded if the video input is lost. Text
message is superimposed.
3
2
Black + Ident
A black screen is encoded if the video input is lost. Text message is
superimposed.
3
2
Bars & Red + Ident
Bars and red test pattern is encoded if the video input is lost. Text message
is superimposed.
3
2
Stored OSD
Available if an OSD has been downloaded to the Encoder.
3
3
No Video PID
The video PID is no longer transmitted, but it is still referenced in the SI.
3
3
No ASI O/P
The ASI output is turned off
3
3
Predictive Processing (SD Only)
This is a read-only indication of the current mode of a multipass-capable
Encoder.
Table 4.26: Predictive Processing
Selected Option
Description
Normal
Encoder is in non-multipass mode.
Advanced
Encoder is in multipass mode.
Input Termination Option (SD Analogue Only)
This enables the termination of the analogue video input to be switched On
or Off.
Noise Reduction Option
3
This option enables the noise reduction feature to be switched on (at
different levels) or off. The feature can be used when the incoming picture
material is corrupted by high frequency noise (such as white noise). When
noise reduction is enabled, the Encoder applies sophisticated edge
preserving filters on the incoming material and removes the noise which
can reduce the encoding difficulty considerably. Refer to Application Note
ST.AN.1094, Video Noise Reduction and Compression for more
information.
3
Noise reduction is only available when software option M2/ESO2/NR or M2/ESO2/HDNR is purchased.
