Options and Upgrades
Page 3-24
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
ST.RE.E10137.3
Figure 3.11: Rear Panel Connectors (M2/EOM2/ATMS45 ATM PDH/DS3 Module)
3.11.2 Connectors
This port is available on the S11365 physical
layer option module. It provides a
bi-directional interface to a PDH/DS3 network
at a transmission rate of 45 Mbit/s. This is a
full duplex service.
Table 3.15: PDH/DS3 Connector
Item Specification
Connector type
BNC
Connector designation
ATM-PDH-DS3
3.12 M2/EOM2/ATMS155E STM-1 Electrical Module
3.12.1 Assembly
See Table 3.1 for the slots that it can be installed in.
For details of the DVB-ASI Copper Input, DVB-ASI Copper Output and
Ethernet Connector refer to Section 3.7.3, Common Connectors on
NOTE…
Be aware that the BNC connector positions on this module are reversed when compared to the same
connectors on the E3 and DS3 modules.
IN OUT
Encoder
Video In
HD SDI
Audio In
ATM Network PDH/DS3
Interface Module
IN ATM-PDH-DS3 OUT
IN
DVB ASI–C
OUT
ETHERNET
Output to PDH/DS3 B-ISDN Network
ASI-C Output
SDI IN
HD SDI IN
AUDIO IN
Input from PDH/DS3 B-ISDN Network
ASI-C Input
Local Control
ASI OUT 1
ASI OUT 2
ASI OUT 3
Output Transport Stream
The Host Encoder
Output Transport Stream
outputs are still
Output Transport Stream
available.
