Operating the Equipment Locally: ATM Network Interface Option Module
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
Page 4-133
ST.RE.E10137.3
Table 4.168: CDV Tolerance Options
Valid Input Range
Description
Min: 0
µsec
Max: 4000 µsec
Step Size: 1 µsec
The maximum ATM network Cell Delay Variation of the
MPEG transport stream that can be tolerated (in micro
(µ) seconds).
TS Asi Output Option
This enables the TS Asi Output to be changed.
Table 4.169: TS Asi Output Options
Selected Option
Description
Active
The transport stream ASI output is enabled.
Not Active
The transport stream ASI output is disabled.
Asi Stuffing Bytes Option
This enables the Asi Stuffing Bytes to be changed.
Table 4.170: Asi Stuffing Bytes Options
Valid Input Range
Description
0 Byte
mode
1-7
Bytes for Burst mode
Status-only Options
The following options are status only and cannot be changed.
•
Valid Stream
•
Packet Status
•
Bit-rate
•
Bit-rate (Min)
•
Bit-rate (Max)
•
Lost Cells
•
Misinserted Cells
•
Corrected Packets
•
Uncorrected Packets
•
Length Errors
•
Crc Errors
•
Unknown Cells
