Operating the Equipment Locally — Setup Menu: Video Menu
Page 4-38
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
ST.RE.E10137.3
Input Horiz Res (HD Only)
A table of live options for 1080 input only and can be 1920 or 1440. This is
used to set how much picture is fed to the encoding engine. If it is 1440,
the sides of the video will be lost.
Video Locked (SD Only) and HD Video Locked Option
This option indicates whether the video is locked. It is for status only and
cannot be changed.
Ident Text Option (SD Only)
This is the text that is displayed if the video output is lost (see page 4-38).
Video Bandwidth Option
The Video Bandwidth Option controls the filtering of the video before it is
compressed. Reducing the bandwidth requires slightly less bits in the
compressed bit-stream. Refer to ST.AN.BW.E10074 for more information.
Table 4.24: Video Bandwidth Options
Selected Option
Description
Sharp
Filter is at the maximum bandwidth possible for the resolution selected.
Medium
Slightly reduced bandwidth.
Medium Soft (SD Only)
Reduced a little further.
Soft
Reduced a little further still.
Auto
Automatically adjusts the bandwidth depending on the video bit-rate and resolution settings.
Adaptive Pre-processing
Changes the filtering of the input signal according to the complexity of the
picture. It will be a small change from the bandwidth/noise reduction
setting currently selected.
OP Video Loss Option
This option gives the choice of what is displayed on the television screen in
the event of losing video input.
NOTE…
Black and ASI off are the only options available in HD mode.