Operating the Equipment Locally — Setup Menu: Video Menu
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
Page 4-25
ST.RE.E10137.3
Table 4.9: Audio AC-3 Descriptor Options
Selected Option
Description
DVB & ATSC
Both the ATSC and DVB descriptors are used with the audio streams.
DVB only
Only the DVB descriptors are used with the audio streams.
ATSC only
Only the ATSC descriptors are used with the audio streams.
Logical Chan Desc Option
This enables the Logical Channel Descriptor to be turned On or Off. The
information is included in the NIT (for Australia mainly).
Logical Channel Option
NOTE…
This option is only shown if the Logical Chan Desc option is set to On.
This enables a number to be given to the Logical Channel.
DVB Subtitles
NOTE…
This option is only available when Remux Input n Mode is set to DVB Subt.
DVB Subtitle mode is provided for subtitles to be added to the locally
encoded service only. It is not possible to add subtitles to services arriving
on a remux input.
Table 4.10: DVB Subtitle Options
Selected Option
Description
Off
On streams 1, 2, 3, 4
On streams 1, 2, 3
On streams 1, 2
On stream 1
The encoder shall include a PES Private Data component entry in the PMT and include the
VBI_data_descriptor and Subtitle descriptor within this component definition in the PMT for each of
the 1 to n DVB Subtitle streams.
NOTE…
The Encoder does not check that the incoming stream actually contains DVB subtitle data nor whether
the user-entered subtitle PID corresponds to the incoming stream.
4.5.4 Remote
Control
Menu
Overview
The Encoder can be controlled remotely via either an RS-232 or a RS-485
serial link, or alternatively via Ethernet using either SNMP, or a web
browser. The
Remote Control Menu
provides options for configuring these
interfaces. See Figure 4.7 for the
Remote Control
Menu
structure.
