manualshive.com logo in svg

TANDBERG Voyager E5784, Reference Manual, Page: 134 / 384

Share
Download
TANDBERG Voyager E5784 Reference Manual Download Page 134

  

Operating the Equipment Locally — Setup Menu: Video Menu 

Page 4-24 

Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder  

 

ST.RE.E10137.3 

Network Id Option  

This enables the Network Identity to be specified. The information is 

included in the NIT. 

NOTE… 
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.  

Service Id Option  

This option ties the SDT to the PMT and is the same as the Program 

Number in ATSC. This enables the Service Identity to be specified. The 

information is included in the PAT, PMT, SDT, EIT and NIT. 

NOTE… 
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.  

Transport Stream Id Option  

This sets the Transport Stream ID value for the transport stream output 

from the Encoder. 

NOTE… 
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.  

Service Type Option  

The service type identifies the type of service carried. The options are: 

Analog TV, Digital TV, Digital Radio, Teletext, and Data Broadcast. The 

information is included in the SDT. 

PMT PID Option 

This shows the Program Map Table Packet Identifier.  

Stream ID Descriptor Option 

This option turns on or off the insertion of a stream identifier descriptor 

within the PMT. 

Dolby AC-3 Descriptor Option  

This allows a user to specify only the DVB, only the ATSC, or both the 

ATSC and DVB descriptors for use with audio streams. 
It is necessary because the ATSC descriptor existed prior to the DVB 

descriptor and some Decoders (e.g. early Alteias) used the AC-3 descriptor 

for identifying Dolby Digital AC-3 streams. 

NOTE… 
This is only available when the syntax is set to DVB. 

Summary of Contents for Voyager E5784

































































































































































































































































































































































































Reviews:

No comments