manualshive.com logo in svg

TANDBERG Voyager E5784, Reference Manual, Page: 136 / 384

Share
Download
TANDBERG Voyager E5784 Reference Manual Download Page 136

  

Operating the Equipment Locally — Setup Menu: Video Menu 

Page 4-26 

Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder  

 

ST.RE.E10137.3 

IP Address Option 

This option allows the IP Address to be changed. 

MAC Address Option 

The MAC Address cannot be changed. 

Network Mask Option 

This option allows the Network Mask to be changed. 

Gateway Address Option 

This gives the default gateway address used on the Ethernet network 

interface connected via the 10BaseT socket. Any communications to 

network hosts not on the local IP network will be sent to this address.  

Set Community Name Option 

This option allows the SNMP Community Name to be changed. 

SNMP Master Option 

This gives the SNMP Master’s IP address. If this is set, only one SNMP 

controller will be allowed access to the Encoder. It can be set to 

000.000.000.000 to allow any controller access. 

Last SNMP Master Option 

This gives the last SNMP Master’s IP address. It cannot be changed. 

Last SNMP Poll Option 

The Last SNMP Poll option cannot be changed 

SNMP Trap IP Option 

SNMP Traps are a way of reporting status information to a control system, 

but not all control systems can handle them. This option sets the IP 

address to which the trap messages will be sent. If it is set to 

000.000.000.000 then the trap messages will be sent to the last SNMP 

master. 

Trap Level Report Option 

This enables the type of events reported via SNMP traps. The options are; 

Start Msgs only, Fail & Start Msgs or All Traps, which will mean all failures, 

warnings and start messages will be reported. 

Browser User Name Option 

This option is only available from the front panel. The Encoder can be 

controlled via a web browser, but to prevent unauthorised control of the 

Encoder a user name and password must be supplied to ‘log on’ to the 

Encoder. This option enables the web browser user name to be set. 

Browser Password Option 

This option is only available from the front panel. This option allows the 

web browser password to be set. To prevent unauthorised knowledge of 

the password it cannot be read back from the Encoder. 

Summary of Contents for Voyager E5784

































































































































































































































































































































































































Reviews:

No comments