Operating the Equipment Locally — Setup Menu: Audio Menu - Linear PCM [Direct]/via SRC] Menu
Page 4-86
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
ST.RE.E10137.3
Table 4.93: SMPTE 302M Standard Options
Selected Option
Description
1998 Standard
Refers to the 1998 SMPTE 302M standard.
2000 Standard
Refers to the 2000 SMPTE 302M standard.
Channel Option
This option controls the value written to the channel identification field in
the (SMPTE 302M) AES3 data elementary stream header.
Table 4.94: Channel Options
Valid Input Range
Description
Min: 0
Max: 15
This value is written to the channel identification field in the
(SMPTE 302M) AES3 data elementary stream header.
Embedded Source Option
This option defines the embedded source. Select HD-SDI or SD-SDI.
Embedded 1-2 DID Option
This option defines the DID to be de-embedded to obtain the audio source
for SDI Embedded 1 and SDI Embedded 2. If this is set to 1024, then the
default DID will be used. Refer to Annex F, Audio Modes for information
about DIDs.
Table 4.95: Embedded 1-2 DID Options
Selected Option
Description
Min:
0
Max:
1023
Other:
>1023
Off
Select DID
Default DID
Embedded 3-4 DID Option
This option defines the DID to be de-embedded to obtain the audio source
for SDI Embedded 3 and SDI Embedded 4. If this is set to 1024, then the
default DID will be used. Refer to Annex F, Audio Modes for information
about DIDs.
Audio PID Option
This option sets the PID to be used for the audio channel. In the event of a
PID clash, one of the PIDs will be changed by the Encoder’s internal
checking algorithm.
To be DVB compliant the audio PID should not be less than 32. However it
is possible to set the PID to less than 32, but in the event of a PID clash
the Encoder’s internal checking algorithm will not resolve the conflict.
Component Tag Option
This item defines the optional component tag to be assigned to this audio
stream.