Operating the Equipment Locally: Mux Menu
Page 4-124
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
ST.RE.E10137.3
BISS-E Injected Id Option
Access the BISS-E Injected Id option from the
Mux Menu
. This is only used
with BISS-E and is an identifier for the unit, comprising a 56-bit
hexadecimal word.
NOTE…
Take precautions to avoid general knowledge of the BISS-E Injected Id.
4.11 ATM Network Interface Option Module Menu
4.11.1 Overview
This menu permits the selection of the ATM parameters and is only
available if one of the M2/EOM2/ATMS… ATM Network Interface Option
Modules is fitted.
The
ATM
Menu
is selected from the
Setup Menu
by pressing the ATM
softkey (see Figure 4.18 for menu structure).
4.11.2 Add Connection Option
The Add Connection option displays a list of valid profiles from which a
connection can be made. This sets up a Switched Virtual Circuit (SVC) or
Permanent Virtual Circuit (PVC) connection to the other end of the network
to either transmit, receive or transmit and receive an MPEG-2 transport
stream.
Select a profile and press the Connect softkey. This profile is used to
attempt to make a connection and the menu returns to the list of valid
profiles.
NOTE…
The profile defining the connection parameters must be in the Profile list. There can be one Tx
connection and one Rx connection or one Tx/Rx connection active at any time.
Table 4.151: Add Connection Options
Selected Option
Description
Connect
Sets up SVC or PVC connection to the other end of the
network.
Not Connected
No connection to the other end of the network.
