214
D14049.07
March 2010
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications
Maintenance
Command reference - xConfiguration
IPProtocol: <Both/IPv4/IPv6>
Selects whether the VCS is operating in IPv4, IPv6 or dual stack mode. Note: you must restart the system for any changes to take effect.
Default: IPv4
Example:
xConfiguration IPProtocol: IPv4
LDAP Encryption: <Off/TLS>
Sets the encryption to use for the connection to the LDAP server.
Off
: no encryption is used.
TLS
: TLS encryption is used.
Default: Off
Example:
xConfiguration LDAP Encryption: Off
LDAP Password: <S: 0, 122>
Sets the password to use when binding to the LDAP server. The maximum plaintext length is 60 characters, which is then encrypted.
Example:
xConfiguration LDAP Password: "password123"
LDAP Server Address: <S: 0, 128>
Sets the IP address or Fully Qualified Domain Name (FQDN) of the LDAP server to use when making LDAP queries.
Example:
xConfiguration LDAP Server Address: "ldap.server.example.com"
LDAP Server Port: <1..65534>
Sets the IP port of the LDAP server to use when making LDAP queries. Typically, non-secure connections use 389 and secure connections use 636.
Default: 389
Example:
xConfiguration LDAP Server Port: 389
LDAP UserDN: <S: 0, 255>
Sets the user distinguished name to use when binding to the LDAP server.
Example:
xConfiguration LDAP UserDN: "user123"
Log Level: <1..4>
Controls the granularity of Event Logging.
1
is the least verbose,
4
the most.
Note: this setting is not retrospective; it will determine which events are written to the Event Log from now onwards.
Default: 1
Example:
xConfiguration Log Level: 1
Log Server Address: <S: 0, 128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the remote syslog server to which the log will be written. This server must support the BSD syslog protocol. It cannot be
another VCS.
Example:
xConfiguration Log Server Address: "syslog.server.example.com"