background image

93

D14049.07 
March 2010

Grey Headline 

(continued)

TANDBERG

 VIDEO COMMUNICATION SERVER

ADMINISTRATOR GUIDE

Introduction

Overview and 

status

System 

configuration

VCS  

configuration

Zones and 

neighbors

Clustering and 

peers

Call  

processing

Bandwidth 

control

Firewall 

traversal

Appendices

Applications

Maintenance

Searches and transforms

Pattern type 

How the pattern string must match the alias for the rule to be applied. (Applies only if the 

Mode

 is 

Alias Pattern Match

.)

Exact

: the entire string must exactly match the alias character for character.

Prefix

: the string must appear at the beginning of the alias.

Suffix

: the string must appear at the end of the alias. 

Regex

: treats the string as a regular expression.

Pattern string

The pattern against which the alias is compared. (Applies only if the 

Mode

 is 

Alias Pattern Match

.)

Pattern behavior

Determines whether the matched part of the alias is modified before being sent to the target zone. 
(Applies only if the 

Mode

 is 

Alias Pattern Match

.)

Leave

: the alias is not modified.

Strip

: the matching prefix or suffix is removed from the alias. 

Replace

: the matching part of the alias is substituted with the text in the 

Replace string

. The 

Target 

zone

 is then queried using the revised alias. Note that if you want to transform the alias before 

applying search rules you must use 

pre-search transforms

.

Replace string

The string to substitute for the part of the alias that matches the pattern. (Applies only if the 

Pattern behavior

 is 

Replace

.)

On successful match

Controls the ongoing search behavior if the alias matches the search rule.

Continue

: continue applying the remaining search rules (in priority order) until the endpoint 

identified by the alias is found.

Stop

: do not apply any more search rules, even if the endpoint identified by the alias is not found in 

the target zone.
Note that if 

Stop

 is selected, any rules with the same priority level as this rule are still applied.

Target zone

The zone to query if the alias matches the search rule.

State

Indicates if the search rule is enabled or not.

You can test whether a pattern matches a particular alias and is transformed in the 
expected way by using the 

Check pattern

 tool.

You can test whether the VCS can find an endpoint identified by a given alias, without 
actually placing a call to that endpoint by using the 

Locate

 tool.

Zone searching and zone transforms (continued)

Summary of Contents for D14049.04









































































































































































































































































































Reviews: