manualshive.com logo in svg

TANDBERG D14049.04, Administrator'S Manual

Share
Download
TANDBERG D14049.04 Administrator'S Manual Download Page 37

37

D14049.07 
March 2010

Grey Headline 

(continued)

TANDBERG

 VIDEO COMMUNICATION SERVER

ADMINISTRATOR GUIDE

Introduction

Overview and 

status

System 

configuration

VCS  

configuration

Zones and 

neighbors

Clustering and 

peers

Call  

processing

Bandwidth 

control

Firewall 

traversal

Appendices

Applications

Maintenance

Status

Event Log

Event

Description 

Level

Relay Expired

A TURN server relay has expired.

2

Request Failed

A request sent to the Conference Factory has failed.

1

Request Received

A call-related SIP request has been received.

2

Request Received

A non-call-related SIP request has been received.

3

Request Sent

A call-related SIP request has been sent.

2

Request Sent

A non-call-related SIP request has been sent.

3

Request Successful

A successful request was sent to the Conference Factory.

1

Response Received

A call-related SIP response has been received.

2

Response Received

A non-call-related SIP response has been received.

3

Response Sent

A call-related SIP response has been sent.

2

Response Sent

A non-call-related SIP response has been sent.

3

Restart Requested

A system restart has been requested. Refer to the 

Reason

 event parameter for specific information.

1

Search Attempted

A search has been attempted.

1

Search Cancelled

A search has been cancelled.

1

Search Completed

A search has been completed.

1

Search Loop detected

The VCS is in 

Call loop detection

 mode and has identified and terminated a looped branch of a search.

2

Secure mode disabled

The VCS has successfully exited 

Advanced account security

 mode.

1

Secure mode enabled

The VCS has successfully entered 

Advanced account security

 mode.

1

Security Alert

A potential security-related attack on the VCS has been detected.

1

Source Aliases Rewritten

A source alias has been changed to indicate the caller's FindMe ID.

1

Success Response Sent

The TURN server has sent a success message to a client (using STUN protocol).

3

System backup completed

The system backup process has completed.

1

System Backup error

An error occurred while attempting a system backup.

1

System backup started

The system backup process has started.

1

System Configuration Changed

An item of configuration on the system has changed. The 

Detail

 event parameter contains the name of the changed configuration item and its new 

value.

1

System restore completed

The system restore process has completed.

1

Summary of Contents for D14049.04









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands