TANDBERG D14049.04, Administrator'S Manual

Page: 211 / 296

211
D14049.07
March 2010
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications Maintenance
Command reference - xConfiguration
H323 Gatekeeper Registration ConflictMode: <Reject/Overwrite>
Determines how the system will behave if an endpoint attempts to register an alias currently registered from another IP address.
Reject : denies the registration.
Overwrite
: deletes the original registration and replaces it with the new registration.
Default: Reject
Example:
xConfiguration H323 Gatekeeper Registration ConflictMode: Reject
H323 Gatekeeper Registration UDP Port: <1024..65534>
Specifies the port to be used for H.323 UDP registrations.
Default: 1719
Example:
xConfiguration H323 Gatekeeper Registration UDP Port: 1719
H323 Gatekeeper TimeToLive: <60..65534>
Specifies the interval (in seconds) at which an H.323 endpoint must re-register with the VCS in order to confirm that it is still functioning.
Default: 1800
Example:
xConfiguration H323 Gatekeeper TimeToLive: 1800
H323 Gateway CallerId: <IncludePrefix/ExcludePrefix>
Specifies whether the prefix of the ISDN gateway is inserted into the caller's E.164 number presented on the destination endpoint. Including the prefix allows the recipient to directly return
the call.
IncludePrefix : inserts the ISDN gateway's prefix into the source E.164 number.
ExcludePrefix
: only displays the source E.164 number.
Default: ExcludePrefix
Example:
xConfiguration H323 Gateway CallerId: ExcludePrefix
H323 Mode: <On/Off>
Determines whether or not the VCS will provide H.323 gatekeeper functionality.
Default: On
Example:
xConfiguration H323 Mode: On
Interworking Encryption Mode: <Auto/Off>
Determines whether or not the VCS will allow encrypted calls between SIP and H.323 endpoints.
Off : interworked calls will never be encrypted.
Auto : interworked calls will be encrypted if the endpoints request it.
Default: Auto
Example:
xConfiguration Interworking Encryption Mode: Auto