manualshive.com logo in svg

TANDBERG D14049.04, Administrator'S Manual

Share
Download
TANDBERG D14049.04 Administrator'S Manual Download Page 229

229

D14049.07 
March 2010

Grey Headline 

(continued)

TANDBERG

 VIDEO COMMUNICATION SERVER

ADMINISTRATOR GUIDE

Introduction

Overview and 

status

System 

configuration

VCS  

configuration

Zones and 

neighbors

Clustering and 

peers

Call  

processing

Bandwidth 

control

Firewall 

traversal

Appendices

Applications

Maintenance

Command reference - xConfiguration

Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Limit: <1..100000000> 

Specifies the bandwidth limit (in kbps) for any one call to or from an endpoint in the Default Subzone (applies only if the mode is set to 

Limited

). 

Default: 1920 

Example:

 xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Limit: 1920

Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Mode: <Limited/Unlimited/NoBandwidth> 

Determines whether there is a limit on the bandwidth for any one call to or from an endpoint in the Default Subzone. 

NoBandwidth

: no bandwidth available. No calls can be made to or from the Default Subzone.

Default: Unlimited 

Example:

 xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Mode: Limited

Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Limit: <1..100000000> 

Specifies the bandwidth limit (in kbps) for any one call between two endpoints within the Default Subzone (applies only if the mode is set to 

Limited

). 

Default: 1920 

Example:

 xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Limit: 1920

Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Mode: <Limited/Unlimited/NoBandwidth> 

Determines whether there is a limit on the bandwidth for any one call between two endpoints within the Default Subzone. 

NoBandwidth

: no bandwidth available. No calls can be made within the Default Subzone.

Default: Unlimited 

Example:

 xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Mode: Limited

Zones LocalZone DefaultSubZone Bandwidth Total Limit: <1..100000000> 

Sets the total bandwidth limit (in kbps) of the Default Subzone (applies only if Mode is set to Limited). 
Default: 500000 

Example:

 xConfiguration Zones LocalZone DefaultSubZone Bandwidth Total Limit: 500000

Zones LocalZone DefaultSubZone Bandwidth Total Mode: <Limited/Unlimited/NoBandwidth> 

Determines whether the Default Subzone has a limit on the total bandwidth being used by its endpoints at any one time. 

NoBandwidth

: no bandwidth available. No calls can be made to, from, or within the Default Subzone.

Default: Unlimited 

Example:

 xConfiguration Zones LocalZone DefaultSubZone Bandwidth Total Mode: Limited

Zones LocalZone DefaultSubZone Registrations: <Allow/Deny>

Controls whether registrations assigned to the Default Subzone are accepted.
Default: Allow

Example:

 xConfiguration Zones LocalZone DefaultSubZone Registrations: Allow

Summary of Contents for D14049.04









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands