TANDBERG D14049.04 Page 38 Administrator'S Manual Download

Page: 38 / 296

D14049.07
March 2010

Grey Headline

(continued)

TANDBERG

VIDEO COMMUNICATION SERVER

ADMINISTRATOR GUIDE

Introduction

Overview and

status

System

configuration

VCS

configuration

Zones and

neighbors

Clustering and

peers

Call

processing

Bandwidth

control

Firewall

traversal

Appendices

Applications

Maintenance

Status

Event Log

Event

Description

Level

System Restore error

An error occurred while attempting a system restore.

System restore started

The system restore process has started.

System Shutdown

The operating system was shutdown.

System snapshot started

A system snapshot has been initiated.

System snapshot completed

A system snapshot has completed.

System Start

The operating system has started. The

Detail

event parameter may contain additional information if there are startup problems.

TLS Negotiation Error

Transport Layer Security (TLS) connection failed to negotiate.

TMS Agent backup completed

The TMS Agent backup process has completed.

TMS Agent backup error

An error occurred while attempting a TMS Agent backup.

TMS Agent backup started

The TMS Agent backup process has started.

TMS Agent restore completed

The TMS Agent restore process has completed.

TMS Agent Restore error

An error occurred while attempting a TMS Agent restore.

TMS Agent restore started

The TMS Agent restore process has started.

Unregistration Accepted

An unregistration request has been accepted.

Unregistration Rejected

An unregistration request has been rejected.

Unregistration Requested

An unregistration request has been received.

Upgrade

Messages related to the software upgrade process. Refer to the

Detail

event parameter for specific information.

User session finish

A FindMe user has logged out of the system.

User session Login failure

An unsuccessful attempt has been made to log in as a FindMe user. This could be because either an incorrect username or password (or both) was
entered.

User session start

A FindMe user has logged on to the system.

Warning acknowledged

An administrator has acknowledged a warning. The

Detail

event parameter provides information about the nature of the issue.

Warning lowered

The issue that caused a warning to be raised has been resolved. The

Detail

event parameter provides information about the nature of the issue.

Warning raised

The VCS has detected an issue and raised a warning. The

Detail

event parameter provides information about the nature of the issue.

Summary of Contents for D14049.04









































































































































































































































































































Search results

Summary of Contents for D14049.04

Reviews:

Related manuals for D14049.04

Brands by name

Popular brands

TANDBERG D14049.04, Administrator'S Manual

Search results

Summary of Contents for D14049.04

Reviews:

Related manuals for D14049.04

Brands by name

Popular brands