TANDBERG D14049.04, Administrator'S Manual

Page: 102 / 296

102
D14049.07
March 2010
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications Maintenance
Call Policy
Configuring Call Policy using a CPL script
Overview
You can use CPL scripts to configure advanced Call Policy. To do
this, you must first create and save the CPL script as a text file,
after which you upload it to the VCS.
For information on the CPL syntax and commands that are
supported by the VCS, see the
CPL reference section.
Viewing existing CPL script
To view the Call Policy that is currently in place as an XML-
based CPL script, go to the
Call Policy configuration page ( VCS
configuration > Call Policy > Configuration ) and click Show Call
Policy file .
•
If Call Policy has been configured using a CPL script, this
shows you the script that was uploaded.
•
If Call Policy has been configured using the Call Policy rules
page, this shows you the CPL version of the call policy rules.
•
If Call Policy mode is On but a policy has not been configured,
this shows you a default CPL script that allows all calls.
You may want to view the file to take a backup copy of the
Call Policy, or, if Call Policy has been configured using the
Call Policy rules page you could take a copy of this CPL
file to use as a starting point for a more advanced CPL
script.
If Call Policy has been configured using the Call Policy
rules page and you download the CPL file and then upload
it back to the VCS without editing it, the VCS will recognize
the file and automatically add each rule back into the
Call
Policy rules
page.
About CPL XSD files
The CPL script must be in a format supported by the VCS. The
Call Policy configuration page allows you to download the XML
schemas which are used to check the script before it is uploaded
to the VCS, so you can check in advance that your CPL script is
valid. Two download options are available:
Show CPL XSD file
Displays in your browser the XML schema used for the CPL script.
Show CPL Extensions XSD file
Displays in your browser the XML schema used for additional CPL
elements supported by the VCS.
Uploading a CPL script
To upload a new CPL file:
1. Go to the
Call Policy configuration page ( VCS configuration >
Call Policy > Configuration).
The CPL script cannot be uploaded using the command
line interface.
2. From the
Policy files
section, in the
Select the new Call Policy
file
field, enter the file name or
Browse
to the CPL script you
wish to upload.
3. Click Upload File .
Deleting an existing CPL script
If a CPL script has already been uploaded, a
Delete uploaded file
button will be visible. Click here to delete the file.