130
D14049.07
March 2010
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications
Maintenance
Quick guide to VCS traversal client - server configuration
Full details of how to configure a VCS Control
and VCS Expressway as traversal client and
server respectively are given in the following
pages. However, the basic steps are:
On the VCS Expressway, create a
traversal server zone (this represents the
incoming connection from the VCS Control). In
the
Client authentication username
field, enter
the VCS Control’s authentication username.
On the VCS Expressway, add the VCS
Control’s authentication username and
password as credentials in the authentication
database. These can be defined by going to
VCS configuration > Authentication > Devices
> Local database
.
On the VCS Control, create a traversal
client zone (this represents the
connection to the VCS Expressway). Use the
same
Authentication username
and
password
as specified on the VCS Expressway.
On the VCS Control, configure all the
modes
and
ports
in the H.323 and SIP
protocol sections to match identically those of
the traversal server zone on the VCS
Expressway.
Enter the VCS Expressway’s IP address or
FQDN in the
Peer 1 address
field.
Overview
VCS Control (client)
VCS Expressway (server)