149
D14049.07
March 2010
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications
Maintenance
TANDBERG FindMe™ user guide
Configuring your FindMe user account
My devices
A list of all the devices configured for your
FindMe account.
Click
Edit
next to the device whose details you
want to change, to open a new window where
you can modify the device name, address (alias
or number) or picture.
Click
Delete
to remove a device from the list.
Click
Add new device
to open a new window
where you can set up a new device. You can
add up to 15 devices.
When your account was set up, your
system administrator may have
configured one or more principal
devices. These are the main devices
associated with your account. You cannot
delete or change the address of your principal
devices; you can only change the device name
or picture. Contact your administrator if you
need to change your principal devices.
My locations
Lists the locations against which you can
associate different combinations of your
devices.
Forward calls to
shows the primary devices
that are called when your FindMe ID is first
dialed (where that is the currently active
location). If more than one device is listed
here, they will all ring at the same time.
Divert when busy to
shows the devices that
are called if the primary devices are busy.
Divert when not answered to
shows the
devices that are called if the primary devices
are not answered after a specified time.
Click
Edit
next to the location whose details
you want to change, to open a new window
where you can select the primary devices
associated with that location and the devices
to divert to when the primary devices are busy
or not answered.
Click
Delete
to remove a location from the list.
Note that you cannot delete the active location.
Click
Add new FindMe location
to open a new
window where you can set up a new location
and its associated devices. You can add up to
10 locations.
Ensure that none of
the active location's
primary devices are
set to Autoanswer.
If they are, the system will
consider the call to have been
answered when Autoanswer
is initiated, and so it will not
divert the call to any other
devices.
FindMe account details
The FindMe ID and external telephone number
of the account being configured.
Active location
Shows the currently
Active
location. When someone calls your
FindMe ID the devices associated with your active location are
called.
To change your active location, click on the radio button next to
the required location name. One of your FindMe locations must
always be active.
If no devices or locations are configured, all calls to your
FindMe will be rejected.
Change Password
Click here to change the password used to
access your FindMe account (if your account
name and password are managed locally
within the VCS). This goes to a new page where
you can enter a new password. Note that
passwords are case sensitive.
Logout
Click here to exit the FindMe home page.
FindMe home page
This page summarizes your FindMe account.
It shows your configured devices and locations,
and your currently
Active
location.
From here you can change your
Active
location
or use the
Add
,
Edit
and
Delete
buttons to
modify your device and location details.
!
